Self Bondage Neoprene Armbinder (Poly Webbing Straps)


Price:
$149.99

Description

If you've ever seen pictures of armbinders in use and wondered what that would feel like, well now you finally have a chance!   

This self bondage armbinder is incredible.  There is a long strap attached to the zipper, this strap is then threaded through a specially placed d-ring that allows for the armbinder to be used for self bondage.  Simply attach the long strap to a door knob, pinch it into a door jamb, or secure it to a surface in some other way, then just pull against the strap to zip the armbinder up into place!  The strength and softness of neoprene makes for an armbinder that is truly magical to experience.  

The material tightly binds both arms behind the sub's back. This item is made to last, using the wonderful neoprene material that forms a cocoon that is tight yet lighter than leather.

The sizing is for the size of the elbow opening (the circumference at the top of the armbinder).  Sizing is as follows:

Small: 20"

Medium: 23"

Large: 29"

X-Large: 35"

XX-Large: 40"

Small, Medium and Large armbinders are approximately 19" "deep" (from fingertips to the top of the armbinder opening). The X-Large is approximately 20" deep. The XX-Large is approximately 22" deep.

Measurement should be taken around the arms 2" above the elbows held as close together behind the back as close as can be comfortably maintained. Measurements are unstretched, so there will be some additional give (up to 2-3") on your armbinder when you receive it.

**IMPORTANT INFO BELOW**

NOTE: THIS ARMBINDER CAN BE DIFFICULT TO GET INTO.  The small and medium sizes are MUCH harder than the larges.  Those sizes are only recommended for individuals who can naturally bring their elbows close together behind their back.  However, even with the Large and X-Large sizes, when putting the armbinder on, the zipper must be able to slide easily up the track like in the video (the elbows should not have to be forced together, this puts too much tension on the zipper).  If it cannot slide easily, there is a chance that the zipper could come off the track or the zipper could separate or teeth could break.  Bondage Webbing will NOT be responsible for items that are used this way.  The point where the zipper pull attaches should be at approximately the level of the shoulders to ensure that the strain on the zipper is limited.  So, if you are using a door knob as the attachment point, you may need to do so on your knees.

 

*If you want to have extra security around the upper arms and to help hold the arms against the body, these straps can be used in a self bondage manner to bind the chest and shoulders:

Bondage Straps 

For extra padding on straps, see this listing:

Padded Sheaths

 **Option for D-Ring should be used with care.  If pulled too hard on (like used in a hogtie) it could rip through the fabric of the armbinder.  This D-Ring is stitched directly through the mitt, so there will be a small portion of the mitt on the inside that is pinched together right between the fingertips. 

Estimate shipping

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Red-Head SB Princess
Armbinder that easily works for Self Bondage

Absolutely love this Armbinder! ♥ I've gone through loads of Armbinders trying to find ones that work for self-bondage, and most of them just break.

However this Armbinder works fantastic, it's stretchy and comfortable, but tight and restricting, just how I like it.

The adjustable straps will cater to a range of sizes. Once you've got it where you want it, trim the excess and use a lighter to seal the end of the webbing.

My only critique is the zipper seems a little stiff, so I'm terrified I'm going to break it. As long as you follow the instructions though, it zips up fine.

This also works great in combination with the Body Harness from the core of the Master Hogtie. I used an extra strap to tether the Armbinder to the harness at the wrists.

When you've had your fun, escape is simple enough, even with how tight I've got the shoulder straps.

Also great praise to BW for super quick dispatch & shipping on my order ♥♥

J
Joe
A really lovely toy

As a big gal from the gyms, I was worrying about whether the maximum size will be broken by me. At the time I am writing this comment, I had struggled out from the 29” more than 10 times with my good flexibility XD. It is recommended to use padded sheath on the shoulder straps, because the 1” straps could hurt you if you leave them on bare skin. Also, Anon’s advice are really helpful when I hear zipper coming up like a long note in the music.
Will order a medium one soon, I had a bet with my friend that she will get the 23” if I failed to it. If you feel you could use a smaller one, try to struggle out yourself without the help from any wall corner.

W
W
Takes a moment to set up but well worth it!

Nothing but praise for this thing, can only really echo what the other reviews have said thus far. While it can take a moment to set up the straps to however tight you wish the armbinder to be, once it's on properly it is certainly not going to be coming off unless you really want it to.
The material itself is great and surprisingly breathable, you could leave yourself bound comfortably for hours on end if you wished.
Had mine shipped to the UK and while customs was lousy to get through it arrived promptly and in great condition.
Can't recommend enough if you're looking into self-bondage - fantastic product!

A
Anon
Needs some elbow grease

My advice to you: Get a good quality pair of flat-nosed pliers and tighten the zipper onto the track on each of its four corners. This makes it a lot more durable. If you want the armbinder to really press your arms together, this is the best way to do it. If the zipper is still sliding back open under stress, give it another round with the pliers. This has worked for me on multiple sizes of armbinder.

Another thing, tilt your arms out and upward (like a strappado) when putting it on. This helps the polywebbing to pull the zipper slide at a straight angle rather than like 45 or 90 degrees or whatever. I get a lot less resistance doing it this way, and can easily tell when the slide has reached the top of the track.

That said, still try and be gentle with it because it's not invincible. Of course, being gentle doesn't mean loosening the the straps. Go as tight as you want, see what what you can get away with. Just don't get frustrated and yank on the zipper, because it might pop off and then you'll have to spend an hour fixing it.

Other than that, I'd just be echoing Laura's review. With a little elbow grease, this thing works fantastically. I use the 20" now, smallest size, practically on a daily basis. Have been for months. Hasn't broken once yet. Love this thing.

A
Anon
Needs som elbow grease

Get some flat-nosed pliers with a comfy grip and tighten the zipper onto the track on each of its four corners. This makes the armbinder a lot more durable. Initially, I broke my 23" after using it twice and had to repair it myself at home. About a month later, I ordered a 20" and now use that exclusively instead of the larger size.

Why the change? Very simple. I realized that in repairing the old one, I had tightened the zipper. When I did this to the new one, it worked perfectly.

My only other advice would be to tilt your arms out and up straight (like a strappado) to help the zipper move up the track more easily when putting it on. This allows the zipper to be pulled straight rather than at a 90 degree angle, from my experience, makes things a lot smoother.

Other than that, I'd just be echoing Laura's review. This thing is great!

You may also like

Recently viewed