Description
*DEFECT* This item was made with a smaller zipper than we typically use with armbinders (size #8 vs. #10). If too much strain is put on the zipper, there is a chance that the zipper pull could come off the track. No refunds will be given if this were to happen. Other than the zipper, this item is in perfect condition.
If you've ever seen pictures of armbinders in use and wondered what that would feel like, well now you finally have a chance!
This self bondage armbinder is incredible. There is a long strap attached to the zipper, this strap is then threaded through a specially placed d-ring that allows for the armbinder to be used for self bondage. Simply attach the long strap to a door knob, pinch it into a door jamb, or secure it to a surface in some other way, then just pull against the strap to zip the armbinder up into place! The strength and softness of neoprene makes for an armbinder that is truly magical to experience.
The material tightly binds both arms behind the sub's back. This item is made to last, using the wonderful neoprene material that forms a cocoon that is tight yet lighter than leather.
The sizing is for the size of the elbow opening (the circumference at the top of the armbinder). Sizing is as follows:
Small: 20"
Medium: 23"
Large: 29"
X-Large: 35"
Small, Medium and Large armbinders are approximately 19" "deep" (from fingertips to the top of the armbinder opening). The X-Large is approximately 20" deep.
Measurement should be taken around the arms 2" above the elbows held as close together behind the back as close as can be comfortably maintained. Measurements are unstretched, so there will be some additional give (up to 2-3") on your armbinder when you receive it.
**IMPORTANT INFO BELOW**
NOTE: THIS ARMBINDER CAN BE DIFFICULT TO GET INTO. The small and medium sizes are MUCH harder than the larges. Those sizes are only recommended for individuals who can naturally bring their elbows close together behind their back. However, even with the Large and X-Large sizes, when putting the armbinder on, the zipper must be able to slide easily up the track like in the video (the elbows should not have to be forced together, this puts too much tension on the zipper). If it cannot slide easily, there is a chance that the zipper could come off the track or the zipper could separate or teeth could break. Bondage Webbing will NOT be responsible for items that are used this way. The point where the zipper pull attaches should be at approximately the level of the shoulders to ensure that the strain on the zipper is limited. So, if you are using a door knob as the attachment point, you may need to do so on your knees.
*If you want to have extra security around the upper arms and to help hold the arms against the body, these straps can be used in a self bondage manner to bind the chest and shoulders:
For extra padding on straps, see this listing:
**Option for D-Ring should be used with care. If pulled too hard on (like used in a hogtie) it could rip through the fabric of the armbinder. This D-Ring is stitched directly through the mitt, so there will be a small portion of the mitt on the inside that is pinched together right between the fingertips.